Hunter Promotion

  • Sale! Hunter Controller – X-Core Outdoor Residential – (Quantity of 10 Units per Case)

    $1,500.00 $576.50

    The new Hunter X-Core Residential Outdoor Controller presents handy water management control in a compact, user-friendly controller that is capable of meeting the irrigation requirements for a wide range of residential landscapes. Simply put, the XC brings a whole lot extra to a small controller. Like extra power? The XC offers a choice of 2-, 4-, 6-, and 8-station models, each with plenty of might to operate one or two valves per station plus a pump start relay or master valve. Extra features include global seasonal adjustment and a 365-day calendar to make water savings easier, plus a default system that permits retrieval of the original program entered into the controller.

    Extra flexibility with three programs (each with four start times), multiple scheduling formats, and the ability to select sensor input by station. And extra memory with a non-volatile on-board program backup and a high-energy lithium battery for timekeeping to assure you’ll never have to reprogram the controller due to power outages.

    The choice for those who demand outstanding reliability, the Hunter X-Core Residential Outdoor Controller is where to turn for extra peace of mind.

    • Height: 8-5/8″
    • Width: 7″
    • Depth: 3¾”

    Electrical Specifications

    • Transformer input: 120 VAC or 230/240 VAC (international model)
    • Transformer output (24 VAC): 1 A
    • Station output (24 VAC): 0.56 A
    • Pump/master valve (24 VAC): 0.28 A
    • Sensor inputs: 1

    Approvals

    • CE, UL, cUL, C-tick, FCC

    X-Core Door Card
    X-Core Owners Guide
    X-Core Product Instruction Guide
    Hunter Warranty

    Case Pricing (Quantity of 10 Units per Case)

    • List Price – $1500.00
    • Sale Price – $576.50

    More ...
  • Sale! Hunter Nozzle – MP1000-360 Rotary – (Quantity of 10 Units Per Case)

    $107.50 $45.50

    The revolutionary Hunter MP1000-360 Rotary Nozzle features a unique, multi-trajectory rotating stream delivery system that achieves water-conserving results. Rather than simply “spray” water onto landscapes, MP Rotators deliver multiple streams of water at a steady rate. This slower application rate allows water to gently soak into the soil and achieves an even distribution throughout the area being irrigated. This increased efficiency results in 30% less water use when compared to traditional sprays and significantly reduces wasteful runoff.

    The MP Rotator can be installed onto any conventional spray head body or shrub adapter, transforming them into high uniformity, low precipitation rate sprinklers with matched precipitation at any arc and any radius. The Hunter MP1000-360 Rotary Nozzle is a great choice for new systems, as they provide immense range flexibility (from 5’ strip to 35’ radius), decrease material costs, and provide better system efficiency. MPs are also perfect for revitalizing older systems—a retrofit can solve both low pressure and poor coverage problems.

    Operating Specifications

    • 8′ to 15′ radius, 360º
    • Recommended operating pressure: 40 PSI

    Options

    • Pair with Pro-Spray PRS40 to achieve pressure regulation at the head of 40 PSI
    • Adding “HT” will specify male threaded nozzles

     

    MP Rotator Brochure
    MP Rotator Design Guide
    MP Rotator Reference Card
    MP Rotator Tech Sheet
    MP Rotator Savings Calculator (Microsoft Excel Format)
    • Hunter Warranty

     

    Case Pricing (Quantity of 10 Units Per Case)

    • List Price – $107.50
    • Sale Price – $45.50

    More ...
  • Sale! Hunter Nozzle – MP1000-90 Rotary – (Quantity of 10 Units Per Case)

    $107.50 $45.50

    The revolutionary Hunter MP1000-90 Rotary Nozzle features a unique, multi-trajectory rotating stream delivery system that achieves water-conserving results. Rather than simply “spray” water onto landscapes, MP Rotators deliver multiple streams of water at a steady rate. This slower application rate allows water to gently soak into the soil and achieves an even distribution throughout the area being irrigated. This increased efficiency results in 30% less water use when compared to traditional sprays and significantly reduces wasteful runoff.

    The MP Rotator can be installed onto any conventional spray head body or shrub adapter, transforming them into high uniformity, low precipitation rate sprinklers with matched precipitation at any arc and any radius. The Hunter MP1000-90 Rotary Nozzle is a great choice for new systems, as they provide immense range flexibility (from 5’ strip to 35’ radius), decrease material costs, and provide better system efficiency. MPs are also perfect for revitalizing older systems—a retrofit can solve both low pressure and poor coverage problems.

    Operating Specifications

    • 8′ to 15′ radius, adjustable from 90º to 210
    • Recommended operating pressure: 40 PSI

    Options

    • Pair with Pro-Spray PRS40 to achieve pressure regulation at the head of 40 PSI
    • Adding “HT” will specify male threaded nozzles

     

    MP Rotator Brochure
    MP Rotator Design Guide
    MP Rotator Reference Card
    MP Rotator Tech Sheet
    MP Rotator Savings Calculator (Microsoft Excel Format)
    • Hunter Warranty

     

    Case Pricing (Quantity of 10 Units Per Case)

    • List Price – $107.50
    • Sale Price – $45.50

    More ...
  • Sale! Hunter Nozzle – MP2000-90 Rotary – (Quantity of 10 Units Per Case)

    $107.50 $45.50

    The revolutionary Hunter MP2000-90 Rotary Nozzle features a unique, multi-trajectory rotating stream delivery system that achieves water-conserving results. Rather than simply “spray” water onto landscapes, MP Rotators deliver multiple streams of water at a steady rate. This slower application rate allows water to gently soak into the soil and achieves an even distribution throughout the area being irrigated.

    This increased efficiency results in 30% less water use when compared to traditional sprays and significantly reduces wasteful runoff. The MP Rotator can be installed onto any conventional spray head body or shrub adapter, transforming them into high uniformity, low precipitation rate sprinklers with matched precipitation at any arc and any radius.

    The Hunter MP2000-90 Rotary Nozzle is a great choice for new systems, as they provide immense range flexibility (from 5’ strip to 35’ radius), decrease material costs, and provide better system efficiency. MPs are also perfect for revitalizing older systems—a retrofit can solve both low pressure and poor coverage problems.

    Operating Specifications

    • 13′ to 21′ radius, adjustable from 90º to 210º
    • Recommended operating pressure: 40 PSI

    Options

    • Pair with Pro-Spray PRS40 to achieve pressure regulation at the head of 40 PSI
    • Adding “HT” will specify male threaded nozzles

     

    MP Rotator Brochure
    MP Rotator Design Guide
    MP Rotator Reference Card
    MP Rotator Tech Sheet
    MP Rotator Savings Calculator (Microsoft Excel Format)
    Hunter Warranty

     

    Case Pricing (Quantity of 10 Units Per Case)

    • List Price – $107.50
    • Sale Price – $45.50

     

    More ...
  • Sale! Hunter Nozzle – MP3000-90 Rotary-10 – (Quantity of 10 Units Per Case)

    $107.50 $45.50

    The revolutionary Hunter MP3000-90 Rotary Nozzle features a unique, multi-trajectory rotating stream delivery system that achieves water-conserving results. Rather than simply “spray” water onto landscapes, MP Rotators deliver multiple streams of water at a steady rate. This slower application rate allows water to gently soak into the soil and achieves an even distribution throughout the area being irrigated.

    This increased efficiency results in 30% less water use when compared to traditional sprays and significantly reduces wasteful runoff. The MP Rotator can be installed onto any conventional spray head body or shrub adapter, transforming them into high uniformity, low precipitation rate sprinklers with matched precipitation at any arc and any radius.

    The Hunter MP3000-90 Rotary Nozzle is a great choice for new systems, as they provide immense range flexibility (from 5’ strip to 35’ radius), decrease material costs, and provide better system efficiency. MPs are also perfect for revitalizing older systems—a retrofit can solve both low pressure and poor coverage problems.

    Operating Specifications

    • 22′ to 30′ radius, adjustable from 90º to 210º
    • Recommended operating pressure: 40 PSI

    Options

    • Pair with Pro-Spray PRS40 to achieve pressure regulation at the head of 40 PSI
    • Adding “HT” will specify male threaded nozzles

    MP Rotator Brochure
    MP Rotator Design Guide
    MP Rotator Reference Card
    MP Rotator Tech Sheet
    MP Rotator Savings Calculator (Microsoft Excel Format)
    • Hunter Warranty

     

    Case Pricing (Quantity of 10 Units Per Case)

    • List Price – 107.50
    • Sale Price – $45.50

    More ...
  • Sale! Hunter Sprinkler – HUPGP-04, 4″ Pop-up – (Quantity of 25 Units Per Case)

    $525.00 $203.00

    The Hunter PGP-Ultra pop-up sprinkler takes the foundation of the best-selling PGP rotor, and raises the bar. The Hunter PGP-Ultra has a variety of new features developed over three decades of research, customer feedback, and lab testing.

    Among the improvements to Hunter’s PGP-Ultra is its non-strippable drive and automatic arc return. These two features work to allow the turret to be turned without causing damage, and return the turret to its original arc regardless of where it is turned.

    Other advanced features of the Hunter PGP-Ultra include 34 nozzle options with several radius choices, and a headed slot and set screw. The diversity of the Hunter PGP Ultra pop-up sprinkler, offers system installers an array of efficient options for any site.

    Operating Specifications

    • Radius: 22’ to 52’
    • Flow: 0.5 to 14.1GPM
    • Inlet Size: 3/4” NPT
    • Radius: 22′ to 52′
    • Flow rate: 0.5 to 14.1 GPM
    • Recommended pressure range: 25 to 70 PSI
    • Operating pressure range: 20 to 100 PSI
    • Precipitation rates: 0.4 in/hr approx.
    • Nozzle trajectory: Std = 25 degrees, Low angle = 13 degrees

    PGP-Ultra Brochure
    PGP-Ultra Cut Sheet
    • Hunter Warranty

    Case Pricing (Quantity of 25 Units Per Case)

    • List Price – $525.00
    • Sale Price – $203.00

     

    More ...
  • Sale! Hunter Sprinkler – I-20-04, 4″ Pop-up-20 – (Quantity of 20 Units Per Case)

    $500.00 $207.80

    Standard features of the Hunter I-20-04 includes an adjustable arc, plastic riser, check valve, 8 standard nozzles, and 4 low-angle nozzles. If you’ve ever desired the convenience of being able to use just one rotor to cover all of your needs, here it is.

    Do you have a small area for which you don’t want to create a separate spray zone? Is a portion of your landscape in sandy soil? Is the landscape a mix of shrub zones and expanses of grass? Does one part of the turf require a higher cut? With all the features on today’s I-20 Ultra (most notably its ability to effectively cover a radius range from 17 up to 47′) there’s a single-sprinkler alternative to stocking a variety of rotors and sprays.

    With over 22 different nozzle choices, the Hunter I-20 Ultra rotor can handle the full range of irrigation needs.

    • Radius: 17’ to 47’
    • Flow: 0.36 to 14.8 GPM
    • Inlet Size: 3/4” NPT
    • Models: Shrub, 4″, 12″
    • Arc setting: 50 to 360 degrees
    • Factory installed rubber cover
    • Through-the-top arc adjustment
    • Quick check arc mechanism
    • Water lubricated gear-drive
    • Nozzle choices: 34
    • Nozzle racks: 1.5 to 8.0 Blue, 2.0 to 4.5 Low Angle Gray, 0.50 to 3.0 Black, 6.0 to 13.0 Green, MPR-25, MPR-30, MPR-35

     

    I-20 Brochure
    I-20 Cut Sheet
    Hunter Warranty

     

    Case Pricing (Quantity of 20 Units Per Case)

    • List Price – $500.00
    • Sale Price – $207.80

    More ...
  • Sale! Hunter Sprinkler – PGJ-04, 4″ Pop-up – (Quantity of 20 Units Per Case)

    $475.00 $163.00

    The PGJ Delivers All The Benefits of a Rotor In a Compact, Spray-Sized Package.

    It was built to bring all the efficient benefits of rotary sprinklers to applications that typically call for a spray. Its many features include a rack of easy-to-install-and-change, water-efficient nozzles, easy arc adjustment, and all the safety and durability that comes with a rubber cover.

    The PGJ is capable of working in tandem with larger rotors to combine big and small areas in a single zone, offering a convenience and efficiency that sprays do not. When used in the right application, the PGJ allows fewer heads to perform more efficiently at a more economical price.

    • Nozzle choices: 8
    • Nozzle range: 0.75 to 5.0
    • Standard factory installed nozzle: 2.0 only
    • Factory installed rubber cover
    • Through-the-top arc adjustment
    • Quick check arc mechanism
    • Water lubricated gear-drive
    • Warranty period: 2 years

    PGP Brochure
    PGP Cut Sheet
    Hunter Warranty

    Case Pricing (Quantity of 20 Units Per Case)

    •List Price – $400.00
    •Sale Price – $163.00

    More ...
  • Sale! Hunter Sprinkler – PGP-ADJ-04, 4″ Pop-up – (Quantity of 20 Units Per Case)

    $400.00 $139.00

    The Hunter PGP-ADJ-04 is Hunter’s original product. The design and performance of the Hunter PGP-ADJ-04, has placed this sprinkler a cut above the rest. Improvements to the PGP-ADJ-06 have allowed it to remain the number one selling rotor in the world ever since.

    This sprinkler is designed for residential and light commercial irrigation. This pop-up sprinkler rotates silently, then disappears when the job is done. It delivers even water distribution. It is also unequaled for reliability, durability, versatility, and value.

    The Hunter PGP-ADJ-04 is driven by todays technology. This includes the industries best gear mechanism to provide you with years of service. With its patented features and Hunter’s years of experience in gear-drive technology, it’s no wonder the Hunter  PGP-ADJ-04 remains the professionals choice.

    Operating Specifications

    • Radius: 22′ to 52′
    • Flow rate: 0.5 to 14.1 GPM
    • Recommended pressure range: 25 to 70 PSI
    • Operating pressure range: 20 to 100 PSI
    • Precipitation rates: 0.4 in/hr approx.
    • Nozzle trajectory: Std = 25 degrees, Low angle = 13 degrees
    • Overall Height: 7¾”
    • Pop-up Height: 4″
    • Exposed Diameter: 1¾”
    • Inlet Size: ¾” NPT

    PGP Brochure
    PGP Cut Sheet
    Hunter Warranty

     

    Case Pricing (Quantity of 20 Units Per Case)

    • ListPrice – $400.00
    • Sale Price – $139.00

    More ...
  • Sale! Hunter Sprinkler – PROS-04, 4″ Pop-up Body – (Quantity of 50 Units Per Case)

    $122.50 $49.50

    The Hunter PROS-04 Pro-Spray has been manufactured with the precision required to ensure reliable operation and peak performance for years to come. This solid performer boasts heavy-duty ABS construction, including an extra-thick body and cap.

    Exclusive body ribs make it easier to install, adjust, and service while also providing more stability for the sprinkler in loose soils. But brawn isn’t all this product offers.

     

    The sprinkler also features a user-friendly “pull-ring” flush cap that helps keep debris to a minimum and a multi-function wiper seal that eliminates flow-by. Add in its compatibility with all industry standard female nozzles as well as Hunter’s own complete line-up of adjustable, fixed, and specialty nozzles and you have the industry’s most sophisticated spray sprinkler. The Hunter PROS-04 is a spray designed with the professional in mind.

    Operating Specifications

    • Recommended pressure range: 15 to 100 PSI
    • Overall Height: 5-7/8″
    • Pop-up Height: 4″
    • Exposed Diameter: 2¼”
    • Inlet Size: ½” NPT

    Pro Spray Brochure
    PRS-40 Spec Sheet
    Hunter Warranty

     

    Case Pricing (Quantity of 50 Units Per Case)

    • List Price – $122.50
    • Sale Price – $49.50

    More ...
  • Sale! Hunter Valve – ICV Series – (Quantity of 12 Units Per Case)

    $1,440.00 $595.80

    The Hunter ICV Series-1 inch Valve is the top-of-the-line valve you can count on for superior durability and ability to handle exceptionally high pressures.

    For a long-lasting valve that can deliver dependable performance at commercial sites, this is the heavy-duty workhorse you can count on.

    Created to handle the wide range of conditions different sites will bring, this valve includes both a fabric reinforced diaphragm and flow control as standard features, and can consistently withstand pressures of up to 220 PSI while handling the continual hammer that such forces will produce. The Hunter ICV Series-1 inch valve also offers the added option of the Accu-Sync pressure regulator to maintain a safe, constant water pressure level. Plus, it’s exceptionally easy to service, with bonnet fasteners that can be loosened and tightened using a variety of common contractor tools.

    Accu-Sync is designed to avoid sprinkler over-pressure condition. You will experience significant water savings with Hunter’s Accu-Sync pressure regulator. Accu-Sync is a simple pressure regulator designed for all of Hunter™ control valves. The adjustable model enables the zone pressure to be set anywhere between 20 and 100 PSI, while fixed models remove the guesswork and can be installed throughout any system easily. No matter which model you choose, all zones stay in tune with Accu-Sync.This option is available in adjustable pressure or fixed pressure models.

     


    Details
    • Height: 5½”
    • Length: 4¾”
    • Width: 4″
    • 0.1 to 40 GPM
    • Recommended pressure range: 20 to 220 PSI
    • Solenoid Specifications
    • 24 VAC solenoid
    • 350 mA inrush, 190 mA holding, 60 HZ
    • 370 mA inrush, 210 mA holding, 50 HZ

    Factory Installed Options
    • DC latching solenoid
    • Filter Sentry

    User Installed Options

    • Solenoid conduit cover (P/N 464322)
    • DC latching solenoid (P/N 458200)
    • Accu-Sync pressure regulator
    • Reclaimed water ID handle for ICV101, 151, 201 (P/N 561205) and 301 (P/N 515005)
    • Reclaimed water ID Tag for all ICV valves (P/N 700392) (Included on Filter Sentry Models)



    Accu-Sync

    Valve-with-Accu-Sync

    Accu-Sync is designed to avoid sprinkler over-pressure condition. You will experience significant water savings with Hunter’s Accu-Sync pressure regulator. Accu-Sync is a simple pressure regulator designed for all of Hunter’s control valves. The adjustable model enables the zone pressure to be set anywhere between 20 and 100 PSI, while fixed models remove the guesswork and can be installed throughout any system easily. No matter which model you choose, all zones stay in tune with Accu-Sync.This option is available in adjustable pressure or fixed pressure models.

     


    Accu-Sync Brochure
    Accu-Sync Spec Sheet
    • Hunter Warranty

    Case Pricing (Quantity of 12 Units Per Case)

    • List Price –  $1440.00
    • Sale Price – $595.80

     

    More ...
  • Sale! Hunter Valve – PGV Series – (Quantity of 20 Units Per Case)

    $640.00 $247.00

    Hunter Valve  has a 1″ Non-Threaded Inlet/Outlet Valve with Flow Control. These professional grade valves are ready for all system sizes. This hard working, heavy-duty valve offers the best features of Hunter’s top-of-the-line valves.

    Built with enough durability to handle the rigors of most residential and light commercial sites, the PGV is available in an array of configurations. For smaller landscape applications, the PGV is available in four 1″ body configurations: angle, globe, male x male, or male x barb design. In turn, each model is available in either a flow control or non-flow control version.

    For larger landscape applications, the PGV comes in both 1-1/2″ and 2″ globe/angle models (with flow control). All models feature durable high-grade construction and a rugged diaphragm with support to prevent stress failure.

    • Sizes: 1-1⁄2″, 2″
    • External and internal manual bleed allows quick and easy “at the valve” activation
    • Double-beaded diaphragm seal design for superior leak-free performance
    • Optional: DC latching solenoids enable Hunter’s battery-powered controllers
    • Captive bonnet bolts provide hassle-free valve maintenance
    • Low flow capability allows use of Hunter’s micro-irrigation products
    • Encapsulated 24 VAC solenoid with captive plunger for hassle-free service
    • Temperature rating: 150° F
    • Application: Residential/light commercial
    • Sizes: 1″ (25 mm); 1½” (40 mm); 2″ (50 mm)
    • External and internal manual bleed allows quick and easy “at the valve” activation
    • Double-beaded diaphragm seal design for superior leak-free performance
    • Optional: DC latching solenoids enable Hunter’s battery-powered controllers
    • Captive bonnet bolts provide hassle-free valve maintenance
    • Low-flow capability allows use of Hunter’s micro-irrigation products
    • Encapsulated 24 VAC solenoid with captive plunger for hassle-free service
    • Temperature rating: 151 F (66° C)

    PGV Brochure
    PGV Cut Sheet
    • Hunter Warranty

    Case Pricing (Quantity of 20 Units Per Case)

    • List Price – $640.00
    • Sale Price – $247.00

     

     

     

    More ...